Linear Technology: Rail-to-Rail Single-Ended to Differential Amplifier

Rail-to-Rail Single-Ended to Differential Amplifier
Drives High Speed 16- to 18-bit SAR ADCs

MILPITAS, CA – January 25, 2010 – Linear Technology introduces the LT6350, a 33MHz, low noise, rail-to-rail input and output ADC driver that settles to 16-bits in just 350ns. It is suitable for driving the latest highest performance SAR ADCs such as the LTC2393-16. The LT6350 incorporates two op amps and matched resistors to create a differential output from a
single-ended high impedance input. As a result, a differential gain of 2 is achieved with no external feedback resistors, and higher gain can be obtained by using feedback resistors. Each of the two internal op amps achieve a low 1.9nV/Hz input-referred noise density, resulting in a total output-referred noise of just 8.2nV/Hz. The LT6350 enables high performance ADCs to achieve better than 110dB SNR over a 1MHz bandwidth.
The input op amp is trimmed for constant low differential input-referred voltage offset over the input range to prevent VOS steps from degrading distortion. At 100kHz, the LT6350 can typically achieve -102/-97dBc HD2/HD3.
The LT6350 provides rail-to-rail input and output range. With a single 5V supply, the outputs can swing 0.055V to 4.945V, and by using a negative supply, the outputs can each swing from 0V to 4.945V. The LT6350 operates on 2.7V to 12V total supply. The LT6350 consumes 4.8mA supply current and has a shutdown mode that allows the system to reduce power consumption during periods of inactivity.
Fully specified commercial (0°C to 70°C), industrial (-40°C to 85°C) and extended (-40°C to 125°C) temperature range versions of the LT6350 are available in 8-lead MSOP and 3mm x 3mm DFN packages. For more information, visit www.linear.com.

Summary of Features: LT6350

• Rail-to-Rail Input & Outputs
• Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step
• 1.9nV/√Hz Input-Referred Op Amp Noise
• High Impedance Input
• No External Gain-Resistors Required
• 2.7V to 12V Supply Operation, 4.8mA Supply Current
• Low Power Shutdown
• Low Distortion (HD2/HD3): –102dBc/–97dBc at 100kHz, VOUTDIFF = 4VP-P
• High DC Linearity: <±1LSB, 16-Bit, 8VP-P
• 3mm × 3mm 8-Pin DFN & 8-Lead MSOP Packages

Rail-to-Rail Single-Ended to Differential Amplifier
Drives High Speed 16- to 18-bit SAR ADCs

MILPITAS, CA – January 25, 2010 – Linear Technology introduces the LT6350, a 33MHz, low noise, rail-to-rail input and output ADC driver that settles to 16-bits in just 350ns. It is suitable for driving the latest highest performance SAR ADCs such as the LTC2393-16. The LT6350 incorporates two op amps and matched resistors to create a differential output from a
single-ended high impedance input. As a result, a differential gain of 2 is achieved with no external feedback resistors, and higher gain can be obtained by using feedback resistors. Each of the two internal op amps achieve a low 1.9nV/Hz input-referred noise density, resulting in a total output-referred noise of just 8.2nV/Hz. The LT6350 enables high performance ADCs to achieve better than 110dB SNR over a 1MHz bandwidth.
The input op amp is trimmed for constant low differential input-referred voltage offset over the input range to prevent VOS steps from degrading distortion. At 100kHz, the LT6350 can typically achieve -102/-97dBc HD2/HD3.
The LT6350 provides rail-to-rail input and output range. With a single 5V supply, the outputs can swing 0.055V to 4.945V, and by using a negative supply, the outputs can each swing from 0V to 4.945V. The LT6350 operates on 2.7V to 12V total supply. The LT6350 consumes 4.8mA supply current and has a shutdown mode that allows the system to reduce power consumption during periods of inactivity.
Fully specified commercial (0°C to 70°C), industrial (-40°C to 85°C) and extended (-40°C to 125°C) temperature range versions of the LT6350 are available in 8-lead MSOP and 3mm x 3mm DFN packages. For more information, visit www.linear.com.

Summary of Features: LT6350

• Rail-to-Rail Input & Outputs
• Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step
• 1.9nV/√Hz Input-Referred Op Amp Noise
• High Impedance Input
• No External Gain-Resistors Required
• 2.7V to 12V Supply Operation, 4.8mA Supply Current
• Low Power Shutdown
• Low Distortion (HD2/HD3): –102dBc/–97dBc at 100kHz, VOUTDIFF = 4VP-P
• High DC Linearity: <±1LSB, 16-Bit, 8VP-P
• 3mm × 3mm 8-Pin DFN & 8-Lead MSOP Packages

Aktuell Informativ Unabhängig: Deutsche-Politik-News.de

Deutsche Politik News und Infos: Nachrichten @ Deutsche-Politik-News.de !



Aktuell Informativ Unabhängig: Deutsche-Politik-News.de	Suche auf D-P-N.de:

Home Anmelden/Einloggen	DPN-Aktuell DPN-Exklusiv Kolumne Fakten Themen Skandale Top-News Neueste Videos